Leave Your Message
A Comprehensive Guide On All Types Of Butterfly Valve
Blog
37%

A butterfly valve is a quarter-turn rotary valve. It serves to start, stop, isolate, or regulate fluid flow inside a pipeline. Its basic operating principle stays simple. A circular disc rotates around a valve shaft. When the disc sits parallel to the flow direction, the valve stays open. When the disc turns 90 degrees and sits perpendicular to the flow path, the valve stays closed.

Parts Of Butterfly Valves

1. Body

The valve body forms the outer pressure-containing structure. It installs between pipeline flanges or connects directly to pipe ends. Common body styles include wafer, lug, U-type flange, double flange, and welded designs. Materials receive selection according to medium, pressure, temperature, corrosion level, and standard requirements. Cast iron and ductile iron appear common in water systems. Carbon steel, stainless steel, and alloy materials see use for more demanding industrial service.

2. Stem

The stem connects the actuator or handwheel to the disc. It transfers torque and controls disc rotation. Butterfly valve stems can take one-piece or two-piece structures. In many resilient seated valves, the stem stays isolated from most process media. This isolation helps reduce corrosion exposure. In high-performance or metal seated valves, stem material selection grows more critical. Pressure, temperature, and process fluid may place higher stress on the shaft in these cases.

3. Disc

The disc acts as the flow control element inside the valve. Its shape, thickness, surface finish, and material determine flow capacity and sealing behavior. In the open position, the disc aligns with the pipeline to allow flow. In the closed position, it presses against the seat to stop the medium. Disc materials may include ductile iron with coating, stainless steel, aluminum bronze, carbon steel, or special alloys.

4. Seat

The seat forms the sealing surface between the body and the disc. Soft seats such as EPDM, NBR, PTFE, and Viton appear common in water, air, light chemical, and general industrial service. Metal seats see use for higher temperature, higher pressure, abrasive media, or fire-safe requirements. Seat selection has a direct effect on shut-off performance, torque, temperature range, and maintenance cycle.

5. Actuator

Butterfly valves can receive operation by lever handle, worm gear, pneumatic actuator, electric actuator, or hydraulic actuator. Lever handles prove common for small manual valves. Gearboxes reduce operating force for larger sizes. Pneumatic and electric actuators support automated control in treatment plants, process lines, HVAC systems, and remote pipeline stations.

Wafer Butterfly Valve PTFE Seat (8)

Types Of Butterfly Valves

Butterfly valves can receive classification by body connection, disc-seat geometry, seat material, and actuation method. The most common classification combines end connection type and offset structure.

1. Wafer Butterfly Valve

A wafer butterfly valve installs between two pipe flanges. Long flange bolts hold it in position as they pass around the valve body. This design stays compact, lightweight, and cost-efficient. It sees wide use in water distribution, HVAC, cooling systems, irrigation, and general low-to-medium pressure pipelines.

2. Lug Butterfly Valve

A lug butterfly valve has threaded or through-hole lugs around the valve body. These lugs align with pipeline flange holes. They allow the valve to receive bolting from each side. This structure supports easier maintenance. One side of the pipeline can often receive removal while the other side remains connected. This depends on pressure rating and system design.

3. Flanged Butterfly Valve

A flanged butterfly valve has integral flanges on the valve body. It connects directly to matching pipe flanges. This design offers stronger mechanical support. It suits larger pipe sizes, higher pipeline vibration, and more demanding service conditions.

4. Welded Butterfly Valve

A welded butterfly valve joins directly to the pipeline by welding. This connection reduces external leakage points. It sees use where permanent installation and pipeline integrity stay critical. Welded designs prove more common in high-pressure or high-temperature pipelines than in ordinary water systems.

5. Zero-Offset Butterfly Valve

A zero-offset butterfly valve, also called a concentric butterfly valve, has the stem centerline and disc centerline aligned with the body centerline. The disc rotates around the center of the valve seat. Sealing achieves completion by compressing the soft seat as the disc closes.

This design sees wide use in water, air, non-aggressive fluids, HVAC systems, and low-pressure industrial pipelines. The limitation appears in the fact that the disc and seat remain in contact during much of the opening and closing cycle.

6. Double Offset Butterfly Valve

A double offset butterfly valve has two offsets. The stem axis stays offset from the disc centerline. The disc stays offset from the valve body centerline. This geometry creates a cam-like movement. The disc separates from the seat quickly after opening. It contacts the seat mainly near final closure.

7. Triple Offset Butterfly Valve

A triple offset butterfly valve adds a third offset through the conical sealing geometry. The sealing surfaces contact only at final closure. This reduces rubbing between disc and seat. This design supports metal-to-metal sealing. It suits high temperature, high pressure, steam, petrochemical, power, and critical isolation service.

封面2

FAQS

What is the difference between wafer and lug butterfly valves?
Which butterfly valve type is suitable for high temperature service?
Why are butterfly valves common in large pipe sizes?

Butterfly Valve Manufacturer, Supplier, and Factory Support for B2B Projects

FLUIDO operates as a butterfly valve manufacturer, supplier, and factory with valve products covering butterfly valves, gate valves, check valves, ball valves, globe valves, strainers, flanges, pipe fittings, and OEM metal parts. With manufacturing and export experience for global B2B projects, FLUIDO can support procurement teams with butterfly valve selection, size confirmation, material matching, and quotation for bulk industrial valve orders.